Third Week (21/10/19 - 25/10/19)

MONDAY: (Alain Pacheco)

On Monday first we started with Julen, and ay 8.15 we started doing a CATIA exam, which we can do it until 10.00. The exam had two exersises, the first one was a part and the second one a drawing. At 10.10 we started the next class with Gaizka. He continues explaining the CATIA tree to do the die (planes, axis, …) In the last two hours, we did English with Richard. We did some reading and listening exercises and then we continue doing the Erronka.


TUESDAY - IKER LÓPEZ

We started Tuesday working on the design of the die with Gaizka, and what we had had to do that day was inserting the 4 plaques of the die to our design.

We continue working with CATIA V5 until the middle of the second hour when suddenly Gaizka remembered we had to move to the main room to give us a talk about donating blood.

When the talk got over, we came back to class and we continue working in our main project until 2 o'clock, even though we should have had class with Nagore the last two hours.

Wednesday- Andoni Miguel

Like every Wednesday, we have class with julen for 2 hours. During those 2 hours, we made a 3d piece with catia. It was a piece not very difficult, but we had to parameterize it. After the first break , we continued doing the Band Study with Gaizka. The Band Study in my opinion is the most difficult part of the course, and it will cost us to finish. And finally, we did a hour of ``Empresa´´ with Iranzu.

THURSDAY- Oier Zabala

On Thursday first we start with Julen doing a piece to know how to parameter the piece and changing some parameters the piece must be visually the same but with different sizes, but we didn’t have time to finish so we are going to finish the next Monday. After that we have class with Iranzu and we try to finish the brainstorming and the studio de Mercado that we have to hand it on Friday. Finally, we finish the day with Gaizka, we work with the tree and we add some axes and a plane to start drawing in a near future.

FRIDAY - IKER LÓPEZ

In the first hour of Friday, 4 students from "CMM" came to our class to make us the presentation of their business work for Iranzu's subject. They explained to us how their company was created using a PowePoint and they talked about lots of different issues such us the DAFO of their project, the brainstorming for the creation, the market research...

When the first hour finished, we started working again on the design of the die, and from 10:10 to 12:00 we learnt how to add the main columns to our design.

Finally, we had class with Nagore and what we did with her, was continue working on the "AMFE" and when the class got over, we handed it out.