Seventeenth Week (10/02/20 - 14/02/20)

MONDAY-ANDONI

This week we have a lot of things to do. We started the week with two exams . The first one about furniture , to see if we know the design that we are building, to see if we know the different pieces that complete our die and what is the function of this pieces. Apart of this we also make some calculus , about one of the die process.

The second exam was an English exam. Writing exam with whose theme was all of the things that you do in this couse. But we do more things apart of exams.

We continue working with CATIA, learning and practicing how to design using surfaces . Making a lot of different pieces, in many different ways, using it .

TUESDAY- OIER ZABALA

On Tuesday we started the day with Gaizka, he continued with some theory and exercises of “enbutizioa” because on Friday we have an exam.

We also review cutting and bending exercices because some of us had to recover on Friday exam. While we reviewed other, they continued with the 3 challenge doing drawing and the 3D pieces. 

WEDNESDAY – ALAIN PACHECO

We started the day learning about surfaces with Julen and in the second hour, we continued doing the assembly and measuring the pieces of the mold.

After the first break, Gaizka came and continued leaning about surfaces, to do an exam on Friday.

The last hour we continued with the mold in Catia.

THURSDAY - ALAIN PACHECO

We started the day doing CATIA surfaces with Julen, and at 9.00, me and six more people we do the Speaking with Richard to the English subject.

After the first break, we continued doing the assembly and measuring the pieces of the mold.

After the second break, to finish the day, we learned new things of surfaces

FRIDAY - IKER LÓPEZ

The first hour of this Friday was a little bit different from others. The teacher from 2.CMM invited us to attend the presentation of the last challenge of his students, so we went to the events hall and we all saw a couple of teams presenting their work. They talked about the manufacturing of the pieces of the die, which is something we have also worked on, monitoring the situation of each piece.

Then from the second hour to almost the last one, we had the final exam about packing (embutición) with Gaizka. There were two different parts, one made up by hand and the other one using CATIA V5. At the same time, those who didn't pass previous exams did the recovery exam too.

Sixteenth Week (04/02/20 - 07/02/20)

TUESDAY- OIER ZABALA

On Tuesday we started the day with Gaizka, he continued with some theory and exercises of “enbutizioa”. After that at 9 o`clock we explained us with Iranzu, Nagore and Julen the 3 challenge, that which consists of making a piece of plastic by injection.

After that we started with 3 challenge doing the conceptual map that that had to end by the end of the day. Then we finished the notebook of the 2 challenge because it was for Wednesday.

Wednsday ANDONI

On Wednesday we started the classes with Julen, with him we made an exercise in the module of surfaces, to review for the exam of Monday, then with nagore we looked at the notes of each RA, and we continued measuring and making the assembly of the challenge 3, we measured the two bases of the mold, and later we added them to the mold, with iranzu we made the distribution of the questions and later we continued with the challenge where we measured the guide columns and also we joined them to the assembly.


THURSDAY - ALAIN PACHECO RUIZ

We started the day with Julen, learning a new CATIA part, Catia surfaces. We practise with two pieces, and one of that was a button of a machine.

In the second hour, we continued doing the work for the next challenge, measuring the pieces of the mould.

After the second break, we started with a new theory, factory pack. We learnt a lot of formula for do it the exercises.

FRIDAY - IKER LÓPEZ

As always, we started Friday with a class of business with Iranzu, but we didn't do anything special. Then, Gaizka came and he started giving some theory about a different manufacturing process called "embutición" in Spanish. We saw some mathematical formulas and we were taught to use them in the correct way to do some exercises about this new manufacturing process.

Finally, during the last two hours, we had an exam about melting with Nagore. The main purpose of this was seeing if we had learnt something about melting during this second challenge, which of course was a lot to do with the world of melting.