Tenth Week (09/12/19 - 13/12/19)

MONDAY-ALAIN PACHECO

On Monday we started the first hour with Julen, and we do it two pieces with new mechanics. This mechanics we learning to use in the last exam of the year the next week.

After the first break, we continued doing the second project with Salesianos Deusto students. We finished the CATIA V5 pieces. After that, we did the video call of the day to speaking about the project.

TUESDAY-ALAIN PACHECO

On Tuesday we started the first hour with Gaizka, and we continued doing the Project with Salesianos students. At 9:00 we did a video call, to look over the information and the sketches.

We decided divided the CATIA documents into two parts: The tower, which are going to do Salesianos Deusto students and the grab, which are going to do my group.

After that, we continued doing the documents and finishing the grab in CATIA.

WENDNSDAY- ANDONI MIGUEL

Today we have our first video call with the Salesian students of Deusto, and we had to tell them about our progress with the toolholder.  We have to show them how we finished the project and show them our final sketch. In the end we opted for the project of the students of the Salesians of Deusto, but with a lot of changes.  And after showing them everything we started to assemble the tool holder

THURSDAY- OIER ZABALA

On thrusday when we arraived to class we done a video call to get us up to date, we started designing the piece we have selected that for friday was to be finished. 
Then with Iranzu we done some theoretical class of company. Next with Gaizka we continued designing because we had little time to finish. 
Before the end of the day we done another video call to share and explain what we had done during the day.



FRIDAY - IKER LÓPEZ

Friday was the last day of the second week of the "Diseinua" challenge, and the landmark that was set up for that day was handing in the final 3D design. Some people had already their work done because they took advantage of working properly the days before, but some other couples were a bit nervous due to the few time they had to finish the 3D document and hand in it before the deadline.

Of course, most of the couples had a video conference meeting with their correspondent teammates from Salesianos to revise their work and let everything prepared before handing anything in.

Next week the blueprints of the 3D design must be done and submitted before midnight, and the final report of the whole challenge must be finished for Wednesday.

The picture below features the final 3D design of the team formed by Andoni Miguel, Iker Garcia (from Deusto), Unai Garcia (from Deusto) and Iker López.

Ninth Week (02/12/19 - 05/12/19)

MONDAY - IKER LÓPEZ

As we shared before, the first challenge (designing a die) got over the last Friday 29th of November, so this first Monday of December, a new project was shared with all the class.

This new challenge consists of working with other schools to get a project in common, so what the teachers did to introduce the new work was making a presentation by videocall. There are 5 different schools taking part in this project but the one Maristak has to work with is Salesianos from Deusto. Each school presented a little part of the project and also working groups with mixed people from different schools were made.

What does the challenge consist of? Well, this new project asks students to find a way of solving possible problems that the people from CMM could have when working with their lathes, so what students from Maristak and Salesianos have to do is designing a new way to grab the tool used in those lathes or change the way that currently is used. For that, they will have to carry out a 3D document using CATIA V5 and a report which gathers all the information and technical features of their design. 

TUESDAY- OIER ZABALA

On Tuesday first we started collect information of the new challenge, we went to the workshop to speak with Fidel to explain us what the problem in the lathe was. Then after that we started thinking the sketches for this new challenge.

As in this challenge we are working with another pair and we must communicate we done a video call to introduce our ideas and to know each other.

Finally, we decided to do another video call the next day, like this we can say by the video call what work we must do on that day and is going to be easier to organize us the different works.


Wendsnday- Andoni Miguel

At the end of our old project, we are still looking for information about the new challenge, which is to make and design a tool holder, which has to be to the liking of fidel. I started designing my sketch. my sketch is based on a tool holder that works like a jaw. That is to say, to tighten and undo the tool it will work like a jaw that will do this work with some rails of ascent.In the end, after researching about the types of tool holders, each of us began to create our own individual sketch to present it to the whole group on Friday.

THURSDAY-ALAIN PACHECO

We started the day with Julen, and we continued doing the new project with Salesianos Deusto students. Today is the last day to deliver the challenge and we had to finish it in the first four hours because in the last two hours we were going to order all the documents to deliver it.

At 9:30, we do a video call with Salesianos Deusto students, to recover the information of the day.

We deliver at 13:00 all the documents: the four sketches, the planing, many photographs, the draft, and al lof the days certificates.