Andoni MiguelMonday and tuesday
These two days are the first days of our last week before Christmas. We have to finish the notes iker Lopez and me. So with the tool holder designed, we draw the drawings of all the parts of the toolholder.
First the bases and the largest pieces and finally the small and flat pieces of the standardized elements. And after making all the plans, we put in the notes, all the notes of the subject `` Empresa ''.
After doing all this, we just wanted to print all notes. And this is more or less what we did on the sixteenth and seventeenth day.
Wednesday-Oier Zabala
When we arraived to class we done the last retouchings to the planes of the Diseinua proyect, then we started preparing the presentation that will we do tomorrow.
We also had to print the notebook, beacuse the thursday we had to deliver it and we don't want to walk with just the right time.
Finally we leave everything finished for tomorrow.
THURSDAY - ALAIN PACHECO
The first hour we used to prepare the presentation with
Salesianos Deusto and at 9
o´clock we started doing the presentations.
Iker and Andoni were the first from ACE & HAZE to making the presentation, after Iker and Andoni, it was me and the last one doing it was Oier.
After the second break, we continued monitoring the die which is going to fabricate.
FRIDAY - IKER LÓPEZ
Friday 20th of December was the last day of the course of 2019, so that day was a bit special for us.
We didn't have too much work to do and besides, we were leaving class at 12 o'clock, so we used those 4 hours to improve the work done before in the "Diseinua" project (only if it was necessary) and also, to carry on with the handling of the manufacturing of the progressive die in which we'll be still working on our return to class in January.
