Tenth Week (09/12/19 - 13/12/19)

MONDAY-ALAIN PACHECO

On Monday we started the first hour with Julen, and we do it two pieces with new mechanics. This mechanics we learning to use in the last exam of the year the next week.

After the first break, we continued doing the second project with Salesianos Deusto students. We finished the CATIA V5 pieces. After that, we did the video call of the day to speaking about the project.

TUESDAY-ALAIN PACHECO

On Tuesday we started the first hour with Gaizka, and we continued doing the Project with Salesianos students. At 9:00 we did a video call, to look over the information and the sketches.

We decided divided the CATIA documents into two parts: The tower, which are going to do Salesianos Deusto students and the grab, which are going to do my group.

After that, we continued doing the documents and finishing the grab in CATIA.

WENDNSDAY- ANDONI MIGUEL

Today we have our first video call with the Salesian students of Deusto, and we had to tell them about our progress with the toolholder.  We have to show them how we finished the project and show them our final sketch. In the end we opted for the project of the students of the Salesians of Deusto, but with a lot of changes.  And after showing them everything we started to assemble the tool holder

THURSDAY- OIER ZABALA

On thrusday when we arraived to class we done a video call to get us up to date, we started designing the piece we have selected that for friday was to be finished. 
Then with Iranzu we done some theoretical class of company. Next with Gaizka we continued designing because we had little time to finish. 
Before the end of the day we done another video call to share and explain what we had done during the day.



FRIDAY - IKER LÓPEZ

Friday was the last day of the second week of the "Diseinua" challenge, and the landmark that was set up for that day was handing in the final 3D design. Some people had already their work done because they took advantage of working properly the days before, but some other couples were a bit nervous due to the few time they had to finish the 3D document and hand in it before the deadline.

Of course, most of the couples had a video conference meeting with their correspondent teammates from Salesianos to revise their work and let everything prepared before handing anything in.

Next week the blueprints of the 3D design must be done and submitted before midnight, and the final report of the whole challenge must be finished for Wednesday.

The picture below features the final 3D design of the team formed by Andoni Miguel, Iker Garcia (from Deusto), Unai Garcia (from Deusto) and Iker López.