Ninth Week (02/12/19 - 05/12/19)

MONDAY - IKER LÓPEZ

As we shared before, the first challenge (designing a die) got over the last Friday 29th of November, so this first Monday of December, a new project was shared with all the class.

This new challenge consists of working with other schools to get a project in common, so what the teachers did to introduce the new work was making a presentation by videocall. There are 5 different schools taking part in this project but the one Maristak has to work with is Salesianos from Deusto. Each school presented a little part of the project and also working groups with mixed people from different schools were made.

What does the challenge consist of? Well, this new project asks students to find a way of solving possible problems that the people from CMM could have when working with their lathes, so what students from Maristak and Salesianos have to do is designing a new way to grab the tool used in those lathes or change the way that currently is used. For that, they will have to carry out a 3D document using CATIA V5 and a report which gathers all the information and technical features of their design. 

TUESDAY- OIER ZABALA

On Tuesday first we started collect information of the new challenge, we went to the workshop to speak with Fidel to explain us what the problem in the lathe was. Then after that we started thinking the sketches for this new challenge.

As in this challenge we are working with another pair and we must communicate we done a video call to introduce our ideas and to know each other.

Finally, we decided to do another video call the next day, like this we can say by the video call what work we must do on that day and is going to be easier to organize us the different works.


Wendsnday- Andoni Miguel

At the end of our old project, we are still looking for information about the new challenge, which is to make and design a tool holder, which has to be to the liking of fidel. I started designing my sketch. my sketch is based on a tool holder that works like a jaw. That is to say, to tighten and undo the tool it will work like a jaw that will do this work with some rails of ascent.In the end, after researching about the types of tool holders, each of us began to create our own individual sketch to present it to the whole group on Friday.

THURSDAY-ALAIN PACHECO

We started the day with Julen, and we continued doing the new project with Salesianos Deusto students. Today is the last day to deliver the challenge and we had to finish it in the first four hours because in the last two hours we were going to order all the documents to deliver it.

At 9:30, we do a video call with Salesianos Deusto students, to recover the information of the day.

We deliver at 13:00 all the documents: the four sketches, the planing, many photographs, the draft, and al lof the days certificates.